What’s The Difference Between Sand Blasting And Shot Blasting?

What’s The Difference Between Sand Blasting And Shot Blasting?

Both sand blasting and shot blasting are mechanical surface cleaning process. But the principle and application are different.

Sand blasting takes compressed air as its power and shots the high speed abrasive sand stream to the surface of work piece. Due to the impacting and cutting effect of the abrasive sand, the work piece surface is completely cleaned, at the same time, the surface quality and mechanical performance is greatly improved. Processed work piece will have better fatigue resistance and adhesion force, which will help the coating have smooth level and last much longer.

                 Sand blasting machine application: All kinds of small and medium-sized castings forging hardware and other surface cleaning

Abrasive blasting machine function :surface the cleaning , deburring, To stick sand, Enhance the surface roughness

Shot blasting takes the centrifugal force of the high speed rotating disk to shot the steel shots to the work piece surface. After processing, the work piece will have finishing effect and generate pressure stress to improve fatigue strength. Compared with sand blasting, shot blasting do not generate silicon dust and have less pollution to the environment.

Shot blasting machine have different type, application rage is very wind,such as small and medium-sized ,mold,forging,and casting,auto gear and shaft blasting reinforcement,gear shaft,  stabilizer bar ,aluminium casting,irregular parts.

contact way：

Email: cassie@mayflay.com

whatapp:+86 188 1401 3564

skype:cassie

wechat:+86 188 1401 3564

What is Shot Peening Machine?

What is Shot Peening Machine?





Shot blasting is a method used to clean, strengthen (peen) or polish metal. Shot blasting is used in almost every industry that uses metal, including aerospace, automotive, construction, foundry, shipbuilding, rail, and many others. There are two technologies used: wheel blasting or air blasting.

Wheel blasting

Wheel blasting directly converts electric motor energy into kinetic abrasive energy by rotating a turbine wheel. The capacity of each wheel goes from approximately 60 kg per minute up to 1200 kg/min. With these large amounts of accelerated abrasive, wheel blast machines are used where big parts or large areas of parts have to be descaled, or cleaned in some form.

Often the method of transportation of the components to be blasted will define the type of machine: from simple table machines to integrated, fully automatic manipulator machines for full series automotive manufacturers, through to roller conveyors and strip descaling systems.

Air blasting

Air blast machines can take the form of a blast room or a blast cabinet, the blast media is pneumatically accelerated by compressed air and projected by nozzles onto the component. For special applications a media-water mix can be used, this is called wet blasting.

In both air and wet blasting the blast nozzles can be installed in fixed positions or can be operated manually or by automatic nozzle manipulators or robots.

The blasting task determines the choice of the abrasive media, in most cases any type of dry or free running abrasive media can be used.



contact way:

Email: cassie@mayflay.com
whatapp:+86 18814013564
skype:cassie
wechat:+86 18814013564

         
                                        Mayflay  shot peening machine for suppliers

                                        Mayflay shot peening machine for spring

                                      Automated shot peening machine

                               
                                     shot peening machine manufacturers

                                     shot peening machinery for sale

small shot peening machine

Mayflay MHB2-1216P11-2 Shot Blasting Machine ,Abrasive blasting machine

Mayflay MHB2-1216P11-2 Shot Blasting Machine ,Abrasive blasting machine

How To Ensure You Get The Maximum Performance Out Of Your Blast Wheel？

Rutten “C” and “Y” Blast Wheel Turbines
The Long-life Rutten has the longest ultimate life expectancy of any, lasting up to 20 times longer than a standard blast wheel or turbine.

This is a highly-engineered blast wheel with exceptionally tight tolerances and built-in specialist superior steel alloys. Due to the higher value materials and the high specification machining costs of these materials, the initial investment and cost of component wear parts are more highly valued.
However, if maintenance and/or production problems are presently a big issue, the economics of this blast wheel can be demonstrated in ultimately high production speeds and demanding applications.

Least Maintenance And Highest Specifications

Less costs for maintenance up to 16 times higher wear resistance and service life of up to 40,000 operating hours (over 18 years on a single shift).

The proven Rutten Long-Life turbines, equipped with components made from carbide steel are characterised by their extremely long service life of up to 40,000 operating hours resulting in significantly higher equipment up times and drastically reduced time requirements for maintenance.
They offer substantial savings in energy consumption and spare part costs/hour. The blades have a precise design with a high recognition value and in addition allows the “Y” blade to be turned and used twice. Long-Life turbines are installed in a wide range of new shot blast equipment and can be easily retrofitted into existing shot blast machines.

Rutten “C” Turbines and the patented Rutten Gamma “Y” Turbines provide “uniquely combined features” by providing:

Increased blast media projection speed (velocity)
Exceptional wear resistance (high-strength modern alloys)
Reduction of energy consumption (due to higher efficiency)
Extreme long service life (C-Turbines, Rutten”Y” Turbines 8 to 20 times longer expected service life)
Adaptable blast pattern (long precise or shorter and wider)
Improved shot blasting results (C-Turbines 50% to 70%, Rutten Gamma “Y” Turbine 45% to 58% higher blasting productivity compared to conventional blast wheels)
Reduced shot consumption (up to 10%)
Very low consumption of spare wear parts (high-strength modern alloys)
Reversible turbine, blast pattern regulator and pre-accelerator on the Rutten Gamma “Y” Turbine

Mayflay Machinery is a professional Shot blasting machine,Shot blasting,Sandblasting,Shot peening,Shot peening machine,Sand blasting machine,Sand blasting equipment,Abrasive blasting,Abrasive Blasting Equipment,Grit Blasting Equipment,Blastrac Shot Blaster,Industrial Sandblasting Equipment,Shot Blast Cleaning,Abrasive Blast Cleaning,Abrasive Sandblasting manufacturer in China.
1.Shot blasting machine is used to clean rust ,oxide skin and deburring.
2.Shot peening machine is used to improve product use life,remove the residual stress,strengthen the metal surface etc.
If you are interested in our machine,Please connect us:
Connect Way:
Manufacturer: Mayflay Machinery (Huizhou) Co.,Ltd
Add:Huizhou city, Guangdong, China. Code: 516223
Mobile Phone: +86 188 1401 3564
Email: cassie@mayflay.com

Wechat:+86 188 1401 3564
Whatsapp:+86 188 1401 3564
Skype: cassie
Phone:0752-3635620/3635520/3635510
Fax:0752-3635620 
Website:www.mayflay.com

How to choose the right shot blasting machine every time ?

When you invest in a new shot blasting machine, you want to know it’s going to work and know customer’s detail requirement and products information clearly. You want to know it’s going to deliver the finish that you need at a reasonable cost and with the cycle time that suits your surrounding processes. And you’re not the only one – all those factors matter to us too, because we want to get it right first time.

I work in MAYFLAY’s Marketing Department. It’s our job to figure out which machine is right for each customer, and having run over 5,000 trials at our headquarters in Guangdong , we’ve got a wealth of experience and data to back up our solutions.

Mayflay Machinery is a professional Shot blasting machine,Shot blasting,Sandblasting,Shot peening,Shot peening machine,Sand blasting machine,Sand blasting equipment,Abrasive blasting,Abrasive Blasting Equipment,Grit Blasting Equipment,Blastrac Shot Blaster,Industrial Sandblasting Equipment,Shot Blast Cleaning,Abrasive Blast Cleaning,Abrasive Sandblasting manufacturer in China.
1.Shot blasting machine is used to clean rust ,oxide skin and deburring.
2.Shot peening machine is used to improve product use life,remove the residual stress,strengthen the metal surface etc.
If you are interested in our machine,Please connect us:
Connect Way:
Manufacturer: Mayflay Machinery (Huizhou) Co.,Ltd
Add:Huizhou city, Guangdong, China. Code: 516223
Mobile Phone: +86 188 1401 3564

Email: cassie@mayflay.com
Wechat:+86 188 1401 3564

Whatsapp:+86 188 1401 3564
Skype: cassie
Phone:0752-3635620/3635520/3635510
Fax:0752-3635620 
Website:www.mayflay.com

Mayflay Machinery (huzihou)Co.,Ltd Staircase and office video capture

Mayflay Machinery (huizhou) Co., Ltd. is a diversified enterprise integrating R & D, design, production, installation, sales, service and trade. It has advanced processing equipment and measuring instruments such as CNC bending, CNC shearing and sawing. Specializing in the production of hook-type shot blasting machine, through the type of shot blasting machine, hanging chain shot blasting machine, robot shot peening machine, multi-station shot blasting machine, manual / automatic sandblasting machine, sandblasting room, and its accessories equipment.



Contact me :

Email:cassie@mayflay.com

Moblie:+86 188 1401 3564

Whatapp:+ 86 188 1401 3564

Skype:cassie

wechat:+86 188 1401 3564

Website:www.mayflay.com

Mayflay MHB2-1216P1-2 Hanger type shot blasting machine

Mayflay Machinery (Huizhou) Co., Ltd
This customer after the shot to paint, before the pickling and then sprayed, but the effect is not good, easy to paint. And later found our company, took the sample over the proofing, the results of the shot after the shot he was very satisfied, it was straightforward sign the contract, all the aluminum cast to take over. Like a singer in China sang "no little preparedness, no preparation a little bit", ha ha ha, a nice day
contact me :
Moblie:+86 188 1401 3564
Email:cassie@mayflay.com
Wahtapp:+86 188 1401 3564
Skype:cassie
Wechat:+86 188 1401 3564
Website:www.mayflay.com